Quick Throttle Bundle

Description

The colors may vary depending on our stock.

Installing the throttle  is also really easy, just loosen the hex bolts on the quick throttle, and slide the new throttle stick onto your rod. After this, tighten the hex bolts so that the throttle can’t move. After this, loosen the plexiglass on the throttle stick with a Phillips screwdriver, and lift off the roller with a bearing. Then you slide the cable into the cable hole in the stick. When the cable is in the quick throttle stick, put the roller with a bearing back so that the cable runs through it. Then you install the plexiglass back, and you will be happy with the successful installation and a high-quality throttle stick, which was also really affordable! Then just ride! Lightweight bearing-mounted quick throttle, with an aluminum frame. The cable does not rub against the throttle body, so the cable will not break on its own. The throttle fits an M10 adjustment screw, as well as a universal throttle cable. The throttle fits a 22mm handlebar ends. Also fatbar.